Penis Stretching Electro Rack - E-Stim Cock Electrode CBT - Ultimate Dick Torture - FREE CABLES

Designed as a pecker stretcher and ultimate cock electrode, an extremely comprehensive and adaptable CBT electrode, the culmination of decades perfecting cock electro torture.

The bipolar base ring goes around both cock and balls. This features six brass contact studs, three of which are wired to the red socket and three to the black one. It can function alone (and feels extraordinary) or wired to other parts of the design (described below). The angle relative to the side bars can be adjusted and locked off using the thumbwheels to create the look or torture desired. The rings at the top of the threaded stainless-steel side bars are intended for attaching support chains or a belt if needed.

The shaft or glans is secured in the middle clamp which is also bipolar. There are three studs in the back jaw wired to its red socket and two in the front jaw wired to its black one. Connect both with 4mm banana plugs to your powerbox and it literally feels like the victim's cock is being chopped off on higher settings. This is because the current travels directly through the cockmeat, rather than through skin like it does with silicone loops. Positioned over the glans there is a strong risk of rapid hands-free climax, in which event obviously the session should be extended for at least an hour as punishment - each time!!

The clamp can be adjusted upwards with the thumbwheels to create the tortuous stretch required or simply used to counter varying states of turgidity, which is often an issue with electro CBT.

You can either wire the base ring and clamp as two separate channels or split channels between them to create unique effects including X-flow patterns or include the the urethral sound.

THE WHAT!!?? Well I couldn't resist adding another platform which holds a sound for urethral electro. The securing knob on the back of it is fitted with a 4mm banana socket which touches the sound, this allows the sound to be wired as a pole of one of the channels as shown in the pictures, where it's connecting with the base ring. You can use your own metal sounds from 7mm up to 14mm in width including cum-thru hollow ones, or chose to include one of the options shown in the combination pic.

The design can be easily taken apart for storage as shown. Since both are bipolar, the base ring and cock clamp may be used in isolation.

TWO FREE LEADS INCLUDED - If your powerbox has 3.5mm mini-jack audio outputs like most do, you will need adapter leads to separate the positive and negative poles out to two 4mm banana plugs. Please see last pic and if you would like just banana leads instead (e.g. for use with a Screamlabs X1) let me know.

SIZING:
Using a tailor's measure or string etc, measure tightly around cock and balls when flaccid.

The STD base ring internal diameter (ID) is 45mm so will fit approx. 14cm tackle circumference.
The LRG base ring internal diameter (ID) is 50mm so will fit approx. 15.5cm tackle circumference.
The XLRG base ring internal diameter (ID) is 55mm so will fit approx. 17cm tackle circumference.

After applying electro-gel it's best to get the base ring on before arousal, it should act like a cockring so become tight with turgidity to ensure good contact.

The side threaded rods are 7" (17cm) in length but if you'd like longer or shorter just include a message on ordering.

PRODUCTION:
I make everything to order so please expect at least 5-7 days before shipment. The plastic parts are 3D printed on an 8K Resolution resin printer, they are excellent quality but are hand finished and not injection molded so some layer and finishing marks will be evident as shown in the pics. This makes each piece unique!