Testicle Stretch & Shock Upgrade - Add Balls Torture to Penis Stretching Electro Rack - E-Stim CBT Electrode - FREE CABLE

This is an ADD-ON for my range-topping Penis Stretching Electro Rack please note you do not get a rack with this purchase.

Now my Cock Rack can REALLY lay claim to being the ULTIMATE CBT DEVICE because with this upgrade as well as the penis being both stretched and shocked inside and out, the victim's balls can now be similarly abused on their own dedicated e-stim channel. Pics 2,3,4 and 5 show the full rack with this upgrade installed (NOTE - you do not receive the rack with this product, you must already own one or also purchase it).

This product consists of a two-piece clamp similar to the cock clamp on the main device but this time designed to capture the testicles by clamping across the scrotum above them. The balls can then be stretched downwards using the thumb wheels mounted on threaded rods.

Doing this will isolate the balls nicely and press them into the two 20mm brass disk contacts on the underside of the capture legs of the front plate. Each brass contact is connected to a 4mm banana socket, so that a circuit involving the testicles is now available for wiring to a channel of your e-stim powerbox.

The fourth pic shows how three channels (a,b and c) may now be deployed to create the perfect and complete CBT electro torture.

The last pic shows all the components you will receive with this upgrade. Note that you do not need a new base ring - instead there are revised end caps to go on your existing base ring which support the two new threaded bars on which the balls clamp is mounted.

FREE LEAD INCLUDED - If your powerbox has 3.5mm mini-jack audio outputs like most do, you will need an adapter lead to separate the positive and negative poles out to two 4mm banana plugs. If you would like just banana leads instead choose that cable option.

SIZING:
Because of the adjustable clamp design, one size fits all. The legs of the front plate are designed to funnel the area of the scrotum above balls down into a 40mm wide space but the amount the clamp is done up will determine the final space within the clamp securing the balls. It should be done up enough to ensure the balls do not slip through under stretch but not so much that circulation is cut off.

Stretch: The theaded bars of the standard version support 30mm of stretch downwards/outwards, you can also choose 45mm or even 60mm(!!).

USE:
Wind the thumbwheels of the back plate to the minimum stretch position. Apply a blob of electro-gel to each brass contact of the front plate before placing its running holes onto the back plate's steel prongs with all of the scrotum area above the balls going between the front plate's funnelling legs so that the balls are encapsulated underneath. Screw on and tighten down the plate nuts to secure the balls so that they will not pop through under stretch.

Begin the torture with stretch and then ensuring each testicle is properly presented to a brass contact connect up the 4mm banana plug lead (supplied) to your e-stim power box to much victim protest and noise.

PRODUCTION:
I make everything to order so please expect at least 5-7 days before shipment. The plastic parts are 3D printed on an 8K Resolution resin printer, they are excellent quality but are hand finished and not injection molded so some layer and finishing marks will be evident as shown in the pics. This makes each piece unique!